Radial riveting machine RMU-12-C

  Radial riveting machine RMU-12-C is designed for forming caps in solid steel rivets d=2…12 mm and in tubular steel rivets d=4×1…14×1 mm.

  This riveting machine can be used for movable and immovable riveted connections.

  Due to the high quality of the rivet cap, which is the result of this machine, as well as due to the speed, compact size, ease of operation, this riveting machine will be appropriate for companies that manufacture products with riveted joints.

Formation of a spherical cap in solid steel rivets d=2-12 mm.

Riveting of the movable joint with a steel solid rivet d=12 mm.

Riveting a flat cap on a steel rivet d=8 mm into a countersunk hole.

Riveting a flat cap on a steel rivet d=12 mm into a countersunk hole.

Riveting of a steel semi-tubular rivet d=12х2 mm.

Riveting of a solid stainless steel rivet d=3 mm.

Nomenclature for the order.

Riveting machine RMU-12-C
(overall dimensions).

Riveting machine RMU-12-C with the table C-12-C-1
(overall dimensions).

Riveting machine RMU-12-C with the table C-12-C-2
(overall dimensions).

Riveting machine RMU-12-C
with the table C-12-C-1 and stand H-12-C
(overall dimensions).

Riveting machine RMU-12-C
with the table C-12-C-2 and stand H-12-C
(overall dimensions).